Antelope Coal Project Design services included mechanical design, dynamic analysis, instrumentation, and control system design. The control system design included the logic development, programming (Allen Bradley PLC5/30), supervisory system (Rockwell software RS View32) development and programming, on-site commissioning and performance testing. The conveyor drives are Dodge-Reliance CST hydraulic drives with CDI controller.
|The project is a 2 Km overland conveyor system at 7000 TPH for the transportation of coal. The system consists of four overland conveyors, a tri-roll crusher and a dual chain feeder.|
|Location:||Antelope Coal, Wright, Wyoming, USA|
|Conveyor Length:||2.078 km|
|Belt Strength:||ST-1000 N/mm|
|Belt Speed:||5.6 m/s|
|– Dodge CST drives w/CDI controllers|